C3 Corvettes

Showing 49 to 60 of 135 items
1963-79 Corvette Half Shaft U-Joint French Locks, Steel (4) 1963-79 Corvette Half Shaft U-Joint French Locks, Steel (4)

Muskegon Brake & Tire

1963-79 Corvette Half Shaft U-Joint French Locks, Steel (4)

$5.49

1963-79 Corvette Half Shaft U-Joint Bolt Standard Steel French Locks.  These are sold in a Car Set of 4, and 1 Set Does Both Sides.  Attaches Half Shaft U-Joint Flange to Rear Wheel Bearing Flange....
1963-79 Corvette Half Shaft U-Joint French Locks, Stainless (4) 1963-79 Corvette Half Shaft U-Joint French Locks, Stainless (4)

Muskegon Brake & Tire

1963-79 Corvette Half Shaft U-Joint French Locks, Stainless (4)

$15.95

1963-79 Corvette Half Shaft U-Joint Bolt Stainless Steel French Locks.  These are sold in a Car Set of 4, and 1 Set Does Both Sides.  Attaches Half Shaft U-Joint Flange to Rear Wheel Bearing Flange....
1963-82 Corvette Rear Camber Adjusting Bolt Kit, Pair 1963-82 Corvette Rear Camber Adjusting Bolt Kit, Pair

Muskegon Brake & Tire

1963-82 Corvette Rear Camber Adjusting Bolt Kit, Pair

$24.95

1963-82 Corvette Rear Camber Adjusting Bolt Kit.  Service Replacement.  These are Sold as a Pair.  1 Kit Does Both Sides.
1963-82 Corvette Rear Wheel Bearing Greasing Tool 1963-82 Corvette Rear Wheel Bearing Greasing Tool

Muskegon Brake & Tire

1963-82 Corvette Rear Wheel Bearing Greasing Tool

$12.95

This Tool Allows for the Greasing of the 1963-82 Corvette Rear Wheel Bearing Assemblies without Disassembly.  Recommended Greasing Interval for Rear Wheel Bearings is Every 24,000 Miles.
1965-82 Corvette Rear Spindle, USA Made 1965-82 Corvette Rear Spindle, USA Made

Muskegon Brake & Tire

1965-82 Corvette Rear Spindle, USA Made

$199.95

1965-82 Corvette Rear Spindle Assembly w/Nut.  This Is a USA Made Spindle, Made of the Highest Quality and a Correct Reproduction of GM #3872476.  Sold Individually.  2 Per Car.
Rear Leaf Spring Mount Kit, 8" Lowering  (1963-1982) Rear Leaf Spring Mount Kit, 8" Lowering  (1963-1982)

Muskegon Brake & Tire

Rear Leaf Spring Mount Kit, 8" Lowering (1963-1982)

$49.95

1963-82 Corvette Rear Leaf Spring Mounting Kit Includes 2 Spring Bolts 8" in Length, 4 Rubber Cushions, 4 Washers, 2 Funnel Shaped Washers, and 2 Lock Nuts.
Strut Rod Bushings Car Set, Polyurethane (1963-74) Strut Rod Bushings Car Set, Polyurethane (1963-74)

Muskegon Brake & Tire

Strut Rod Bushings Car Set, Polyurethane (1963-74)

$20.95

1963-74 Corvette Complete Prothane Polyurethane Strut Rod Bushing Set.  This Kit Does Both Sides.  Includes 8 Bushing Halves and 4 Sleeves.  Made in the USA.
1980-82 Corvette Heavy Duty Adjustable Strut Rod (Pair) 1980-82 Corvette Heavy Duty Adjustable Strut Rod (Pair)

Muskegon Brake & Tire

1980-82 Corvette Heavy Duty Adjustable Strut Rod (Pair)

$129.95

This Set of Adjustable Strut Rods Fits 1980-82 Corvettes.  This Includes all Mounting Hardware.  Switching to These Heavy Duty Adjustable Strut Rods with Forged Ends Helps Improve Handling, Alignment, and Tire Wear.  These Eliminate the Camber...
Rear Spring Cup (1963-1982) Rear Spring Cup (1963-1982)

Muskegon Brake & Tire

Rear Spring Cup (1963-1982)

$2.95

1963-82 Corvette Rear Spring Cup For the End of Rear Spring (Holds Rubber Grommet), and Inside of Box End of Trailing Arm (Holds Rubber Grommet). There are 2 Cups Per Side, and 4 Per Car....
Emergency Brake Anchor Plate (1963-1982) Emergency Brake Anchor Plate (1963-1982)

Muskegon Brake & Tire

Emergency Brake Anchor Plate (1963-1982)

$5.95

Emergency brake shoe hold down anchor plate, zinc plated.  2 Required per car.  Sold individually.  
Rear Sway Bar End Link Bushings, Rubber (1963-1996) Rear Sway Bar End Link Bushings, Rubber (1963-1996)

Muskegon Brake & Tire

Rear Sway Bar End Link Bushings, Rubber (1963-1996)

$8.95

1963-96 Corvette Rear Sway Bar End Link Bushings, Rubber. Sold by the each, requires 4 per car.

Muskegon Brake & Tire

1963-77 Corvette Composite Spring Center Stack Kit 355#

$99.95

1963-77 Corvette Composite Spring Center Stack Kit.  Kit is Center Metal, Rubber, and Plastic Components Only - Spring NOT Included.  Kit Includes 1 Bottom Metal Plate, 1 Bottom Clamp Pad, 1 Top Clamp Pad, 1...